There is no single best backup power setup. What you should lease or buy depends on three things: whether you own your roof, how long your outages last, and what you are actually trying to keep running. I have watched people overspend on portable batteries they never use and underspend on home backup right before a three-day outage. So instead of one recommendation, here are the three situations I see most often, and what I would do in each.
Quick credential before the scenarios: I coordinate emergency power logistics at a disaster-response supply company. I have handled 300+ rush power deployments in eight years, including same-day setups for medical clinics and outdoor event organizers. We have done maybe 280 of those, I would have to check the log. Most of what I know came from getting the load math wrong once and never wanting to repeat it.
First, Figure Out Which Situation You Are In
Ask yourself three questions. Do you own the roof above your head and plan to stay for at least five years? If yes, home solar plus storage is on the table. Do you need power that moves—camping, job sites, a rental, or short outages where you only run a fridge and a few lights? Then you are in portable power station territory. Or do you just need your phone to survive a long day away from an outlet? That is a power bank problem, and it is a different purchase entirely.
Speed, load accuracy, and a clear buyout number. In that order, that is what separates a good backup decision from an expensive one.
Scenario A: You Own a Home and Want Fewer Outages (and Lower Bills)
This is where Sunrun comes up most often. The company offers residential solar systems, the Brightbox home battery, and lease or power purchase agreement options that let you avoid a large upfront payment. If you are staying put and your outages last more than a few hours, this category deserves a serious look.
One question I hear constantly: what type of solar panels does Sunrun use? Sunrun does not manufacture panels. It installs tier-one monocrystalline modules, and the exact brand and model vary by region and what is available at the time. Ask your installer for the spec sheet before signing. You want the wattage, the temperature coefficient, and the product and performance warranties in writing. If a sales rep cannot produce that sheet, that tells you something.
Here is the part most people skip. The monthly lease payment is not the number that matters most. The buyout price, the annual escalator, and what is included in service matter more. I have seen leases with a low introductory payment and a 2.9% annual escalator that quietly added thousands over 25 years. I have also seen buyout terms that were never explained until the homeowner tried to sell the house. Transparency here is not a nice-to-have. It is the whole decision.
Per FTC advertising guidelines (ftc.gov), savings claims must be truthful, not misleading, and substantiated with evidence. That applies to 'average savings' figures on solar quotes. Ask what the baseline utility rate was and when it was measured.
Once the system is installed, set up your Sunrun solar login on day one. The account portal is how you monitor production, review billing, and catch a underperforming panel before it becomes a six-month argument. Check your first two bills against the projected production numbers. If they do not line up, call immediately.
What I would do differently than most: I would not assume buying is always better than leasing. It is not. Leasing can make sense if you are not sure you will stay 25 years, or if you would rather not manage inverter replacement and roof penetration warranties yourself. But I would only sign a lease where the buyout schedule and escalator are printed clearly in the contract. If the sales rep says 'we will figure that out later,' walk.
We did not have a formal load-audit process when I started in this work. Cost us when a client's 'small' backup system tripped on the first night because nobody counted the well pump. That is why I now ask for a full load list before quoting any battery size, residential or portable.
Scenario B: You Need Portable Power for Camping, Job Sites, or Short Outages
If you rent, move often, or need power that travels, a portable power station makes more sense than a roof-mounted system. This is also where the spec sheets get confusing fast.
Start with the battery chemistry. LiFePO4 nominal voltage per cell is 3.2 volts. Four cells in series gives you a 12.8-volt nominal pack, which is why most '12V' portable stations actually operate across roughly 10 to 14.6 volts. That matters because your solar panel and your inverter both need to work within that window. A panel rated for a 12V system but with a high open-circuit voltage can exceed the station's input limit on a cold, bright morning. Check the Voc, not just the wattage.
When you are shopping for a solar panel for a portable power station, ignore the peak wattage for a minute. Look at the open-circuit voltage, the maximum input voltage of the station, and the charge controller type. A 200W folding panel paired with a 200W input limit is fine. A 400W panel paired with the same limit is wasted money. Two 100W panels in parallel often outperform one 200W panel in partial shade, which is the normal condition at a campsite.
Capacity honesty is the other trap. Manufacturers love milliamp-hours because the number looks big. Watt-hours are the number you can compare. A 1,000Wh station gives you roughly 850 to 900Wh of usable energy after inverter losses. Ask for the usable Wh, not the marketing Wh.
So glad I insisted on LiFePO4 for a clinic deployment last year. Almost went with a cheaper lead-acid bank, which would have needed ventilation we did not have in that room. That was one decision away from a very bad inspection.
Scenario C: You Just Need Your Phone to Survive a Long Day
This is the simplest category and the one people overthink the most. If your goal is keeping a phone alive through a travel day, a storm, or a long hike, you do not need a 2,000Wh power station. You need a reliable 10,000mAh power bank and a good cable.
How to charge a portable power bank properly: use a certified charger and cable that support USB Power Delivery or Quick Charge, keep it out of direct sun and extreme heat, and do not run it to zero every time. Lithium batteries last longer when you keep them between roughly 20% and 80%. For storage, leave it around 50% if you will not use it for months.
Here is the counterintuitive part. A 20,000mAh brick is not automatically better than a 10,000mAh one. The brick weighs twice as much, discharges faster when idle, and often charges your phone at the same speed. For daily carry, a 10,000mAh PD bank is the better tool. For a three-day outage, the bigger one earns its weight. Match the bank to the scenario, not to the biggest number on the shelf.
Do the math on capacity claims. Milliamp-hours are measured at the 3.7V cell voltage. To get usable phone charge at 5V, multiply by 3.7, divide by 5, then subtract roughly 10 to 15% for conversion losses. A 20,000mAh bank delivers closer to 12,000 to 13,000mAh to your phone in practice. If a no-name brand claims 30,000mAh in a pocket-sized case, the number is fiction. Check the watt-hours instead—most airlines cap carry-on batteries at 100Wh, which is about 27,000mAh at 3.7V.
A Quick Decision Guide
If you own your roof, plan to stay five years or more, and want whole-home backup or lower bills, start with a home solar and storage quote. Ask about panel specs, the lease escalator, the buyout schedule, and what service is included. Set up the account portal early and verify production against projections.
If you rent, move, or need power at a campsite or job site, buy a LiFePO4 portable power station sized to your actual load list. Match the solar panel's open-circuit voltage to the station's input limit. Compare watt-hours, not milliamp-hours.
If you just need a phone to last, buy one good 10,000mAh PD bank and a certified cable. Stop there.
And in every category, ask what is not included before you ask what the price is. The quote that lists every fee upfront—even when the total looks higher—usually costs less in the end. That has been true in emergency logistics, in solar leases, and in every power bank purchase I have ever made. The number you see should be the number you pay.
Ask a related engineering question